Linear 1-Channel Toggling Standard Digital Receiver D-67F

$75.60

Linear 1-Channel Toggling Standard Digital Receiver D-67F

Out of stock

Description

The Model D-67F 1-Channel Alternating Relay Receiver is designed for use in security systems and remote switching functions. A typical application for the receiver is creating a remote arm/disarm feature for a hardwired alarm panel. When a transmitter is triggered with a digital code matching the receiver’s digital code, the receiver’s relay will latch. The next time a transmitter is triggered, the receiver’s relay will un-latch.

The Model D-67F is compatible with standard digital transmitters only.

The output of the D-67F receiver is isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver’s power supply. The receiver provides normally open and normally closed contacts. The current rating of the relay output is 1 amp at 32 volts maximum.

D-67F Manual

Features

  • Operates on 11-24 VDC or 12-16 VAC power
  • One channel
  • Standard digital format: 256 discrete codes
  • One form “C” relay output
  • One Amp contact rating @ 32 Volts AC/DC
  • Alternating relay output; transmit to latch, transmit to un-latch
Specifications

  • Encoding Technique: Pulse width A-1 modulation at 250 bits/sec; four correct 8-bit words required to operate the output
  • RF Carrier Frequency: 303.875 MHz
  • Current Consumption: 1- mA standby
    40 mA operating
  • Dimensions: 4.9 in W x 3.8 in H x 1.3 in D (125 x 97 x 33 mm)
  • Operating Temperature Range: 32° to 140° F (0° to 60°)
  • Antenna: D-67 Wire lead (supplied)
    DUR, Wire lead (supplied)
    DX-12, 9-1/2 inch whip (order separately)