Linear Home Security Pattern Recognition Technology Glass Break Detector TGB-96

$138.60

Linear Home Security Pattern Recognition Technology Glass Break Detector TGB-96

SKU: TGB-96 Categories: , ,

The Model TGB-96 Supervised Pattern Recognition Technology Glass Break Detector is a glass break detector with a built-in transmitter designed for use with Linear’s SX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion receiver/control.

Coding switches are not required or used in the T-90. Each transmitter is pre-coded at the factory to a unique code. With the SX format, there are more than sixteen million codes possible. The TGB-96 can send three different signals: alarm, low battery and status.

The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half years under normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test transmission.

General Specifications

  • Dimensions: 4.25 in W x 3.13 in H x 1.70 in D (108 x 80 x 43 mm)
  • Mounting: screws or double sided tape (supplied)
  • Power: two 3V DL2450 lithium batteries (supplied)
  • Battery Life: up to 3 years
  • Operating Temperature: 32° to 122° F (0° – 50° C)
  • Frequency: 303.875 MHz (North America)
    433.92 MHz (international)
  • Number of Codes: 16,777,216
  • Code Setting Method: factory programmed
  • Glass Detection Range: 20 ft radius typical, 25 ft max
  • Glass Detection Method: pattern recognition technology

Features

  • Dual-technology detection device
  • Full RF supervision
  • Includes T-90D transmitter board
  • Powered from one battery set
  • Alarm, supervisory, and low battery transmissions
  • Lithium battery powered
  • Test, operate LED
  • Shatter pro pattern recognition technology
  • SX format