|
|
  Linear Card Reader Interface AM-CRI | | Linear Card Reader Interface AM-CRITo use swipe card readers or a variety of other Wiegand devices in a Linear access control system, the AM-CRI card reader interface is required. It will support up to two 26 or 31-bit Wiegand input devices from any manufacturer, permitting easy interconnection of card readers, proximity readers, or other devices that use this industry standard.
The AM-CRI interface mounts near the readers and connects to the system controller through a six-wire cable. Power is supplied to the interface and the reader or readers from the controller or an external source of locally powered readers.
Features
- For equipping a Linear access control system with one or two Wiegand devices.
- Card Reader Interface can be used with up to two 26 or 31-Bit Wiegand input devices.
- Power is supplied by system controller or external source for locally powered readers.
- Same as product number ACP00717.
General Specifications
Linear AM-CRI Manual
Linear AM-CRI Literature
Models compatible with the AM-CRI |
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
General
Specifications [ top ]
|
| Power: |
Supplied
by an AM/II or Telephon Entry controller or external power for locally powered
readers; jumper selectable |
| Capacity: |
Up
to two 26 or 31-bit Wiegand devices; two internal rotary switches select
device address |
| Wiring: |
Reader
to AM-CRI: six wires for 5o LED readers, five wires for one LED reader |
| Recommended
Wiring Type: |
Up
to 300 feet, BELDEN 9931 or equivalent (24 AWG): up to 500 feet, WEICO 9405
or equivalent (20 AWG) |
| AM-Cards: |
Wiegand
swipe cards for use with AM-SR card reader, available in sets of 25 cards
each |
Models compatible with the AM-CRI [ top ]
| AM/II |
Multidoor Access Controller |
| AE-2 |
Vacuum Fluorescent Display Telephone Entry |
|
|
|
