Linear 2-Channel Standard Digital Receiver D-2R

$99.00

Linear 2-Channel Standard Digital Receiver D-2R

The Model D-2R 2-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs and improve system performance by eliminating RF interference problems present in multiple-receiver installations.

The Model D-2R is compatible with standard digital transmitters only.

The outputs of the D-2R receiver are isolated dry relay contacts. Dry contacts indicate that the switching contacts are isolated from the receiver’s power supply. The receiver provides normally open and normally closed contacts for each channel. The current rating of each relay output is 1 amp at 32 volts maximum.

Linear D-2R Manual

Features

  • Operates on 11-24 VDC or 12-16 VAC power
  • Current consumption: 15 mA standby, 60 mA operating
  • Two independent channels
  • Standard digital format: 64 discrete codes
  • Two form “C” relay outputs
  • One Amp contact rating @ 32 Volts AC/DC

Specifications

  • Encoding Technique: Pulse width A-1 modulation at 250 bits/sec; four correct 8-bit words required to operate the output
  • RF Carrier Frequency: 303.875 MHz
  • Current Consumption: 15 mA standby
    60 mA operating
  • Dimensions: 4.9 in W x 4.2 in H x 1.3 in D (125 x 107 x 33 mm)
  • Operating Temperature Range: 32° to 140° F (0° to 60°)
  • Antenna: Wire lead (supplied)