|
|
  Linear Supervised Wireless/Hardwired
Security Panel DUAL-824 | | Linear Supervised Wireless/Hardwired Security Panel DUAL-824The DUAL-824 is for wireless/hardwire hybrids. Featuring optional voice
prompts and two-way voice communications.
Features
- Uniquely-Styled, Ultra-Compact Console with Concealed Antenna.
- Surface, Flush or Tabletop Mounting.
- 1-Button Arming and Many other User Amenities.
- Optional Voice Prompts, Touch-Tone Telephone Access, and 2-Way
Voice.
- Quick Learn Transmitters and Windows-Based Programming Via
RA 2400 Software
- Superheterodyne Receiver with 1,500 Foot Range.
- Full Complement of DX and DXS Transmitters for up to 24 Zone
Systems 1,000,000+ ID Codes.
|
- ELECTRICAL
Primary Operating Voltage: 120 VAC, 60 Hz
Transformer: UL listed, Class II, plug-in, 16 VAC, 1.25 A (supplied)
Back-Up Battery: 1.2 Amp-hour, 12 VDC
- RADIO RECEIVER
Type: Superheterodyne
Operating Frequency 315 MHz ± 100 Kc
Sensitivity: -100 dB minimum
Antenna Type: Counterpoised bipolar design
Compatible RF Formats: Linear DX, DXS
- CONTROL PANEL
Radio Zones: 24 supervised
PAC Codes: Eight total, including Duress, Installer and six User
Operating Modes: Off, Chime, Home, Home Instant, Away, and Test
Sensor Types: 11 including Automation, Emergency, Panic, Fire, Perimeter, Exit/Entry, Interior Chime Only, Arm/Disarm A, Arm/Disarm B, and Environmental
Auxiliary Outputs: Automation, External Console Speaker, and External Alarm Siren
Memory: EEPROM retains system programming during total power failure
Operating Temperature: 32° to 120° F (0° to 49° C)
- COMMUNICATOR
Dialing: DTMF or pulse dialing; pulse speed (10 PPS, 60% break, 40% make)
Ringer Equivalence: 0.4 B Reporting Formats: 4 x 2, 40 PPS, or Ademco Contact ID
Telephone Numbers:
Primary, secondary, and supervisory
Reports: Full zone reports, console reports, general system reports, forced arming, and duress PAC
- PHYSICAL CONSOLE
Dimensions: 10.5 in L x 7.75 in W x 2.87 in H (267 x 197 x 73 mm)
Weight: 3 lbs. (1.36 kg)
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
|
