|
|
  Linear Door/Window Battery Powered
Stationary Universal External Contact
or Glass Break Transmitter DXS-31 | | Linear Door/Window Battery Powered Stationary Universal External Contact or Glass Break Transmitter DXS-31Shipping through UPS only when ordering this item. You must select the UPS option when ordering this item.
The Model DXS-31 Supervised Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear's DXS and DX
format receivers. This transmitter can be used in a variety of wireless remote control applications. Triggering the transmitter with its
built-in magnetic switch, an external switch or an external glass break detector sends a digitally coded wireless signal to its companion
receiver.
The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to
unique codes, so no field coding is required. The DXS-31 can send four different codes: alarm, restore, low battery and status.
In a
typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the frame. When the magnet moves more than
1/2" away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a restore signal is sent. Alarms and
restores can also be sent from external contacts wired to the terminal block. Pressing the case sends a test transmission that updates the
receiver to the current state of the contacts and lights the test indicator.
Features
- Alarm, Alarm Restore, Supervisory and Low Battery Transmissions.
- Includes External Magnets.
- Includes Mounting Shoe.
- Lithium Batteries Supplied.
- External Contact Terminals.
|
- Dimensions: 3.3 in L x 1.5 in W x 0.88 in H (84 x 38 x 22 mm)
- Power: Two 3V DL-2032 lithium batteries (supplied); optional - two 3V DL-2450 lithium batteries for extended life
- Battery Life: Three years (typical) with DL-2032 batteries; five years with DL-2450 batteries
- Measured Range: 1,500 feet, open air, with DVS-2400 control panel
- Code Outputs: Alarm, alarm restore, supervisory and low battery
- External Input Terminals: Terminals 1, 2 accept N/C contact devices
- Terminals 2, 3 accept N/O glass break sensors
- JUMPER PIN MODE SELECTION
- Pins 1, 2 Glass break operation only
- Pins 2, 3 For external contact and glass break operation
- Pins 3, 4 For internal reed switch and glass break operation
- Jumper removed: Internal, external and glass break operation
- Operating Frequency: 315 MHz
- Operating Temperature: 32° to 120° F (0° to 49° C)
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
|
