|
|
  Linear Supervised Passive Infrared
Motion Detector DXS-54 | | Linear Supervised Passive Infrared Motion Detector DXS-54Shipping through UPS only when ordering this item. You must select the UPS option when ordering this item.
The Model DXS-54 Supervised Passive Infrared Motion Detector Transmitter is a battery powered passive infrared motion detector with a
built-in transmitter designed for use with Linear's DXS and DX format receivers. This transmitter can be used in a variety of motion
detection applications. When the passive infrared sensor detects motion in its field of view, the transmitter sends a digitally coded
wireless signal to its companion receiver.
The digital DXS code format features over a million possible codes. The DXS transmitters
are precoded at the factory to unique codes, so no field coding is required. The DXS-54 can send three different signals: alarm, low battery
and status.
In a typical installation, the motion detector is mounted indoors in a corner or on a wall between six and eight feet
high. The sensor will monitor the infrared level in its detection pattern. If the level increases or decreases rapidly (as when a person or
animal moves through the area) the transmitter triggers, sending an alarm signal to the receiver.
Features
- Alarm, Supervisory, and Low Battery Transmissions.
- Walk-Test Mode.
- Fresnel Lens with 24 Facets Supplied.
- Battery Saver Circuitry.
- 9V Alkaline Battery Supplied.
|
- Dimensions: 3.2 in L x 1.75 in. W x 4.4 in H (81 x 44 x 112 mm )
- Power: One 9V alkaline battery (supplied)
- Current Consumption: 15 mA transmitting, 4 mA walk test, 8 µA standby,
- 15 µA timer mode
- Battery Life: Three years (typical)
- Battery Saver Timer: 4-minute software timer, rearms after alarm transmission
- Measured Range: 1,500 feet open air, with DVS 2400 control panel
- Code Outputs: Alarm, supervisory, and low battery
- Detector: Balanced dual element, pyroelectric
- Installed Lens: Standard Fresnel lens, 24 facets, 9 main, 8 intermediate, 5 short, 2 creep
- Detection Pattern: 30 feet x 30 feet
- PIR Sensitivity: Preset, non-adjustable, pulse count of 3 with 8-second detection window
- Operating Frequency: 315 MHz
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
|
