Call us Toll free (800) 349-8313 or (818) 222-7191 | |
  Linear Home Security Supervised Glass Break Sensor DXS-91 | | Linear Home Security Supervised Glass Break Sensor DXS-91The Model DXS-91 Supervised Glass Break Detector Transmitter is a glass break detector with a built-in transmitter designed for use with
Linear's DXS and DX Format receivers. When breaking glass is detected, the transmitter sends a digitally coded signal to its companion
receiver/control.
The digital DX code format features more than one million possible codes. Each transmitter is precoded at the
factory to a unique code so no field coding is required. The DXS-91 can send three different signals: alarm, low battery and
status.
The unit is powered by two 3-volt lithium batteries. These batteries will last for approximately two and one half years under
normal climatic conditions. If the battery voltage drops below a preset level, a low battery signal is sent with every alarm or test
transmission.
Features
- Alarm, supervisory, and low battery transmissions
- Lithium battery powered
- Test, operate LED
- Shatter pro pattern recognition technology
- DXS format
- RF frequency: 315 MHz
|
- Dimensions: 4.25 in W x 3.13 in H x 1.7 in D (108 x 80 x 43 mm)
- Power: Two 3V DL-2050 lithium batteries (supplied)
- Battery Life: 18 months
- Measured Range: 1,000 feet, open air, with DVS-2400 control panel
- Code Outputs: Alarm, supervisory, and low battery
- Detection Method: Pattern recognition
- Temperature Range: 32° to 120° F (0° to 49° C)
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present. Copyright © 2010 by Mega Access Controls Inc. All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Mega Access Controls Inc. |