Call us Toll free
(800) 349-8313
or
(818) 222-7191 | |
  Linear Door/Window Home Security External
Contact and Glass Break Sensor DXT-31 | | Linear Door/Window Home Security External Contact and Glass Break Sensor DXT-31The Model DXT-31 Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear's DX Format receivers. This
transmitter can be used in a limitless number of wireless remote control applications. Triggering the transmitter with its built-in magnetic
switch, an external switch or an external glass break detector sends a digitally coded wireless signal to its companion receiver. Pressing
the transmitter's case sends a test transmission.
The digital DX code format features over a million possible codes. The DX
transmitters are precoded at the factory to unique codes, so no field coding is required. The DXT-31 can send three different codes: alarm,
restore and low battery.
In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the
frame. When the magnet moves more than 1/2" away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a
restore signal is sent. Alarms and restores can also be sent from external contacts wired to the terminal block. Pressing the case sends a
test transmission that indicates the current state of the contacts.
The transmitter is powered from two 3-Volt #2032 lithium batteries
with an expected battery life of up to 3 years. The red test/operate indicator lights during operation and test. It will blink during
operation and test when the batteries are low.
A three-position terminal block is for connection to normally closed external contacts
or a normally open Window Bug type glass break sensor. An internal jumper selects which input to use. Selections are: internal switch only,
external switch only, both external and internal switch, and glass break sensor.
A snap-on transmitter mounting plate is provided for
easy installation. The magnet has four height positions. An additional snap-on magnet spacer is provided for a total of eight magnet
positions.
Features
- Alarm, alarm restore, and low battery
transmissions
- Includes magnet for internal contact
- Includes mounting shoe
- External Contact Terminals
- DX
format
- N/O or N/C input loop circuit
- Powered by 2032 two lithium batteries (included)
- RF frequency: 315 MHz
- 1.6" W x 3.4" H x 1.2" D
|
- Dimensions: 3.4 in L x 1.6 in W x 1.2 in H (86 x 41 x 30 mm)
- Power: Two 3V DL-2032 Lithium batteries (supplied)
- Current Consumption: 8 mA average while transmitting 1 µA standby
- Battery Life: Three years (typical)
- Measured Range: 700 feet in open air, one quadrant;
- 500 feet minimum in open air (four quadrant test)
- Code Outputs: Alarm, restore, low battery
- External Input Terminals
- Terminals 1, 2 accept N/C contact devices
- Terminals 2, 3 accept N/O glass break sensors
- Jumper Pin Mode Selection
- Pins 1, 2 Glass break operation only
- Pins 2, 3 For external contact and glass break operation
- Pins 3, 4 For internal reed switch and glass break operation
- Jumper removed: Internal, external, and glass break operation
- Operating Frequency: 315 MHz
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present. Copyright © 2009 by Mega Access Controls Inc.
All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Mega Access Controls Inc. |
