|
|
  Linear 8-Channel N/O Short-to-Common
Output Receiver D-8C | | Linear 8-Channel N/O Short-to-Common Output Receiver D-8CThe Model D-8C 8-Channel Receiver is designed for use in security systems and remote switching functions requiring more than one wireless
zone or output. Using one multi-channel receiver instead of several single-channel receivers enables the installer to cut installation costs
and improve system performance by eliminating RF interference problems present in multiple-receiver installations.
The Model D-8C
is compatible with standard digital transmitters only.
The outputs of the D-8C receiver are solid state transistors. The receiver
outputs for each channel are normally open and switch to ground when activated. The maximum current each output can switch to ground is 40 mA
at 32 VDC.
Features
- 11-24 VDC and 12-16 VAC operations.
- 8 independent channels.
- 32 discrete codes.
- 8-channel N/O switch to common outputs.
- Output capability 40mA.
|
- Encoding Technique: Pulse width A-1 modulation at 250 bits/sec; four correct 8-bit words required to operate the output
- RF Carrier Frequency: 303.875 MHz
- Current Consumption: 10- mA standby
- 40 mA operating
- Dimensions: 4.9 in L x 1.3 in W x 4.2 in H (125 x 33 x 107 mm)
- Operating Temperature Range: 32° to 140° F (0° to 60°)
- Antenna: Wire lead (supplied)
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
|
