|
|
  Linear 64-Channel, 8-Zone Multifunction
Field Selectable Receiver SXR-64 | | Linear 64-Channel, 8-Zone Multifunction Field Selectable Receiver SXR-64Shipping through UPS only when ordering this item. You must select the UPS option when ordering this item.
The Model SXR-64A is a 64-channel, 8-zone, supervised wireless receiver/annunciator designed for use in residential or commercial security
systems. Housed in a rugged metal enclosure with a high-gain receiver, the SXR-64A connects to a hardwired alarm control panel adding
wireless capability to the panel. The unit's eight alarm zones and four supervisory outputs provide a flexible interface. Any or all of the
zones can be used.
The SXR-64A receives signals from a variety of security transmitters then processes, displays and transfers the
signal to the hardwired alarm control panel. Six unique conditions for each transmitter can be shown on the unit’s display. Conditions such
as Open Portal, Transmitter Low Battery, Transmitter Tamper and First Alarm In show the status of each transmitter in the system. Valuable
features such as Alarm Memory and Transmitter Status allow for quick system diagnosis and troubleshooting.
All of the solid state zone
outputs can be either normally open or normally closed electrical configuration and can switch up to 100 mA @ 24 VDC.
Features
- Supports 64 distinct transmitting devices (channels).
- Provides eight field selectable output zones.
- Superheterodyne receiver technology - 1,500 feet of line-of-sight range.
- Uses Linear's 21st SENTRY transmitters (SX format).
- Backwards compatible with ST, ST-1, 50S40, ST-23A, and ESL-371 transmitters.
- Provides full RF supervision with reporting.
- Interfaces with most control panels via N/O outputs/open collector.
- Total flexibility with transmitter configuration and zoning.
- Field selectable status reporting time frame.
- Field selectable device supervision.
- Multifunction display provides complete system updates
|
- Dimensions: 7.9 in L x 1.25 in W x 6.5 in H (201 x 32 x 165 mm)
- Operating Frequency: 303.875 MHz ±100 kHz
- Data Format: Linear SX and Linear S1 formats
- Number of Codes: 16,777,216 with SX; 65,536 with S1
- Number of Channels: 64
- Number of Zones: Eight
- Measured Range: 1,500 feet line of sight with SX transmitters; 500 feet line of sight with S1 transmitters
- Operating Temperature: 32° to 100° F (0° to 49° C)
- Sensitivity: -100 dBm (typical)
- Operating Voltage: 12 to 26 VDC
- Operating Current: 200 mA max.
- Inputs: + voltage input
- - voltage input
- armed input
- Outputs: Eight total zones (field selectable for open or closed operation) - open collector output rated at 50 mA at 24 VDC max per output; plus low battery; status; tamper; test; common
- Connectors: Screw terminals provided for all inputs and outputs
- Display: Three 7-segment LED displays
- Displayed Information: Channel number (1 to 64); first alarm; alarm; status exception, low battery; channel open; tamper
- Transmissions Monitored: Alarm; restore; test; low battery; status; tamper
- Antenna: 9-1/2 inch whip antenna with F-connector (supplied)
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
|
