|
|
  Linear Wireless Security 5-Button,
16-Channel Handheld Transmitter TX-94 | | Linear Wireless Security 5-Button, 16-Channel Handheld Transmitter TX-94The Model TX-94 Supervised 5-Button 15-Channel Handheld Transmitter is a supervised, digitally coded radio transmitter designed for use with
Linear's SX Format receivers. Pressing a button on the transmitter sends a digitally coded wireless signal to its companion receiver. To send
a complete signal, press the transmitter button for a minimum of 2 seconds. The top button can be hidden with the top button cover
supplied.
The TX-94 is a five-button, fifteen-code transmitter. Pressing one of the transmitter's front buttons sends codes one
through four. Pressing the small button on the transmitter's top sends code five. Pressing the transmitter's top button together with each
front button sends codes six through nine. Pressing the two top front buttons together sends code ten. Pressing the two bottom front buttons
together sends code eleven. Pressing the two left front buttons together sends code twelve. Pressing the two right front buttons together
sends code thirteen. Pressing the top left and bottom right front buttons together sends code fourteen. Pressing the bottom left and top
right front buttons together sends code fifteen.
Coding switches are not required or used in the TX-94 transmitter. Each transmitter
is pre-coded at the factory to a unique code. With the SX format, there are more than sixteen million codes possible.
The TX-94 is
supervised for low battery and sends hourly status reports. Some receivers are able to use these signals, others are not. Receivers must be
programmed to the transmitter code before system testing and operation. Refer to the receiver's instructions for details on operation and
programming.
Each TX-94 is powered by two self-contained type 2032 3-volt lithium batteries (included). When the batteries voltage
gets low, a low battery report is sent with any alarm or status report to notify the receiver. The red LED will blink when the transmitter is
activated with low batteries.
A removable pocket clip and belt clip are provided for each transmitter. Either can be attached to the
back of the transmitter allowing the unit to be clipped to shirt pocket or slid onto a belt.
Features
- Complete RF supervision
- Alarm, supervisory, and low battery transmissions
- Unique "Extra" top button
- High visibility operate LED
- Two type 2032 lithium batteries supplied
- Pocket and belt clip supplied
- SX format
|
- Dimensions: 1.6 in W x 4.2 in H x 0.8 in D (41 x 107 x 20 mm)
- Power: Two 3V DL-2032 lithium batteries (supplied)
- Battery Life: Up to five years
- Operating Temperature: 32° to 140° F (0° to 60° C)
- Actuation Indication: LED indicator and tactile feedback
- Frequency: 303.875 MHz (North American)
433.92 MHz (International)
- Measured Range: 3,500 feet with CP-90 control panel
- Number of Codes: 16,777,216
- Code Setting Method: Factory programmed
|
|
Special Order: All special order items require a 50% deposit of the total purchase value before ordering. Please call for lead times on special order items or request a quote by email or fax. Certain items such as, but not limited to, gate operators, telephone entry systems, card reader systems, access control systems, non-stock radio controls, and any item that has been specifically ordered for you are considered a special order items. All returns and cancellations within 30 days or exchanges within our 1-year warranty policy are subject to a 25% restocking fee. All warranties are void where evidence of misuse or abuse is present.
|
|
