Call us Toll free
(800) 349-8313
or
(818) 222-7191 | |
| Home » Remotes » Linear Moore-O-Matic MegaCode Gate or Garage Door Opener Remote MDT-4A |
  Linear Moore-O-Matic MegaCode Gate or
Garage Door Opener Remote MDT-4A | | Linear Moore-O-Matic MegaCode Gate or Garage Door Opener Remote MDT-4AProduct Number: DNT00054A
For adding keyless remote entry and panic functions to an existing access control system or as part of a new radio-based system, Linear offers the MDT series. These handheld transmitters are compatible with all Linear access receivers and controllers. They are a safe, convenient form of door, gate, or gate and door control and are ideal for handicapped access. At sites like campuses and parking garages, where extra security is needed, multi-channel models can be used as panic buttons to summon help.
One-, three-, and five-channel models are available. Each is lithium battery powered and supplied with a metal clip for convenient attachment to a vehicle visor. A proprietary pulse position format results in an extended transmission range.
The MDT-4A five-channel model is for remote control of up to five separate access points or for combining keyless entry and panic functions. It is also for use as a “magic wand” transmitter by personnel responsible for maintenance of a Linear access control system. It allows the user to lock gate A or B open or closed (remotely from a vehicle or office), then to perform a reset or “warn boot” on the system.
All three models are MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver “learns” each of specific code, no unauthorized person can gain access to the system by reprogramming a transmitter. Because there are no dip switches, the code cannot be changed. Block coding is also available, to save the time required for each transmitter to be individually learned. When used with a Linear access controller, all of these transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system. All transmitter code data is stored in no-volatile EEPROM. Data is retained in excess of 10 years, even if battery power runs out.
Features:
- Compatible with all Linear access receivers and controllers
- Superior transmission range
- Factory programmed MegaCode format supports over 1,000,000 codes
- Block coding available with provisions for facility codes
- Lithium battery powered
|
|
General Specifications
|
| Dimensions: |
1.6
in L x 0.8 in W x 4.2 in H (41 x 20 x 107 mm) |
| Power: |
Two
3V 2032 type lithium batteries (supplied) |
| Battery
Life: |
Up
to five years |
| Frequency: |
318
MHz |
| Number
of Codes: |
1,000,000
plus |
| Block
Coding: |
Units
are sequentially coded at the factory to customers specifications.
Facility code may be specified. |
| Channels: |
five
channels |
|
|
| Home » Remotes » Linear Moore-O-Matic MegaCode Gate or Garage Door Opener Remote MDT-4A |
Copyright © 2009 by Mega Access Controls Inc.
All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written permission of Mega Access Controls Inc. |
