|
|
| Home » Remotes » Linear MegaCode Gate or Garage Door Opener Remote MT-1B (Block Coded) |
  Linear MegaCode Gate or Garage Door
Opener Remote MT-1B(Block Coded) | | Linear MegaCode Gate or Garage Door Opener Remote MT-1B (Block Coded)Product Number: ACP00877
The Model MT-1B 1-Channel Block Coded Visor Transmitter is designed for use with Linear's access control products. The Model MT-1B is a single-channel device. Pressing the button on the transmitter will send a signal. A visor clip is included.
The transmitter is MegaCode format, which means each transmitter is factory preprogrammed with one of over 1,000,000 codes, virtually eliminating the possibility of code duplication. Because the receiver "learns" each specific code, no unauthorized person can gain access to the system by reprogramming a transmitter.
Block coded transmitters are factory programmed to a sequential series of transmitter ID codes. When used with a Linear access controller, transmitters can be locally or remotely programmed into memory by entering the first and last codes of the block into the system. Facility codes can be selected to further customize the system.
Features:
- Compatible with all Linear access receivers and controllers
- Superior transmission range
- Factory programmed MegaCode format supports over 1,000,000 codes
- Operate LED
- Visor clip included
- 9-volt battery supplied
- MegaCode format
- RF frequency: 318 MHz
- 2.2" W x 3.8" H x 0.9" D
|
|
General
Specifications
|
| Dimensions: |
2.2
in W x 3.8 in H x 0.9 in D (56 x 97 x 23 mm) |
| Power: |
one
9 V battery (supplied) |
| Frequency: |
318
MHz |
| Number
of Codes: |
1,000,000
plus ID codes, 15 facility codes |
| Code
Set Method: |
Factory
programmed |
| Channels: |
One-channel |
|
|
| Home » Remotes » Linear MegaCode Gate or Garage Door Opener Remote MT-1B (Block Coded) |
|
|
